原始变量守恒形式控制方程的时间准确性分析

基于压力、速度和温度的原始变量为自变量的守恒形式的控制方程可应用于定常流动问题，但是在求解非定常问题，例如某一典型激波管问题时，激波后温度出现过冲现象，即使通过细化网格、提高空间格式精度或者换用其他通量格式仍不能消除，这表明误差可能来自该方法本身。采用一维Euler方程对该方法进行数值分析。分析结果表明，数值误差来自时间项。通过构造相应的双时间步方程，虚拟时间项采用原始变量，而物理时间项采用守恒变量，并在两个相邻物理时间步内作为定常问题求解，可以收敛到相应的守恒形式，消除上述误差，得到准确的非定常数值解。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

基于线性模型跟随的重构飞行控制律设计

线性模型跟随控制是一种传统的控制方法，通过对增益的调整，使实际受控系统的输出跟随参考模型的输出，以达到理想的静态、动态特性。将线性模型跟随控制引入自修复飞行控制系统的重构控制中，针对发生舵面故障的飞行控制系统，设计模型跟随控制律，给出仿真实例。结果表明，该方法具有可行性和有效性。     

捷联惯导系统快速自对准误差模型的建立

通过对惯性制导系统两个基本方程的研究,求出了各状态矢量在各坐标系下的微分方程,然后以ψ角法所确立的平台为基准,分别推导得出惯性制导系统各主要状态的微分方程,从而建立了捷联惯性制导系统的误差模型.最后根据静基座捷联惯导系统初始对准的特点对其进行简化,得到了静基座捷联惯导系统快速自对准的误差模型.     

对消防行政处罚法律依据适用冲突的思考

消防行政处罚是消防执法中大量运用的一种执法行为,在处罚时存在法律依据的适用冲突。对“过失引起火灾,尚未造成严重损失”的消防行政处罚在适用时的法律冲突进行了思考,以便能够更好地执行处罚法定的原则。     

论法治进程中的正当程序

法治的实现有赖于法治要素的具备,而正当程序有助于法治要素的满足。法治社会应具有的正当程序理念是:正当程序是对人权的尊重和保护,是实现正义的重要途径,程序正义优先于实体正义。     

压水型核反应堆功率控制系统的优化设计

在分析了压水型反应堆功率控制系统的前提下,针对其特殊的控制要求,运用基于输出反馈的次最优控制的设计方法和Matlab中的NCD模块,最终实现了系统的优化设计,并对系统进行了某一功率水平下的仿真试验和其它工况下的鲁棒性试验.结果表明,改进后的系统性能有了较大改善.     

实现大空域变轨的三维虚拟目标比例导引律

为了实现反舰导弹的大空域变轨,提出了一种三维虚拟目标比例导引律。该导引律利用简单的控制指令就能控制导弹完成复杂的大空域变轨。采用变轨弹道可以提高导弹的机动性,有效地对抗敌方反导武器系统的拦截,提高突防能力。同时,采用变轨弹道可以增大导弹的射程,实现防区外发射,从而有效地提高发射平台的生存能力。最后,通过仿真实例证明所提出的导引律是很有效的。     

基于遗传算法的观察所优化配置

文章研究了三维地形中的观察所优化配置问题,结合观察所实际情况,给出了利用遗传算法进行观察所优化的计算方法,并编制了计算机应用程序.计算机模拟实验表明,文中采用的算法能综合考虑多种因素,所得结果合理、准确,并且具有较高的效率.     

Attrition through a partially coordinated area defense

An area defense consists of several groups that act independently, i.e., do not communicate with each other. Each group has a fixed number of defenders and a controller that allocates these defenders optimally against the individual attackers comprising an attack. We analyze the effectiveness of this partially coordinated defense against a simultaneous attack of known size in which all attackers are considered to be equally lethal. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005.